濟南手板模型制作是現在很受歡迎的項目，但是如果不了解其中的問題或者其他內容的話，就很容易損壞。下面我們就來了解吧。

　　Ji 'nan hand model making is now a very popular project, but if you do not understand the problems or other content, it is easy to damage. Let's take a look.

　　濟南手板模型制作的話，假如要想達到一個較好的高光效高，能夠選用一些較為合理的方式，包含電鍍或是水渡，全是完全能夠去做到的，由于手板模型的表層會鍍上一層合金，水鍍要比電鍍要難一些，加上水鍍的成本，會更高一些，因此這時候還需要去留意一些返工的問題。

　　Jinan hand-board model manufacture, if want to want to reach a better high photosynthetic efficiency is high, can choose some reasonable way, containing electroplating or water crossing, whole is capable to do that, because the surface of hand-board model will be a layer of alloy plating, water is a little bit more difficult than electroplating, plating and water plating cost will be higher, So there are some rework issues that need to be looked out for.

　　有關手板模型制作的問題，有許多人不清楚該怎樣去處理，實際上像這樣的手板模型可以處理的問題是十分的多的，能夠根據這款手板模型去尋找這個產品設計不足的地方，由于像一些新設計的產品，毫無疑問并不是非常的完善，那么有的時候乃不可能合乎一些使用的要求，因此就需要把一些不足的地方找出來。

　　Questions about hand-board model manufacture, there are a lot of people don't know how to deal with, in fact hand-board model can deal with problems like this is very much, can according to the first hand-board model to find the product design is insufficient place, because like some new design products, there is no doubt that is not very perfect, So sometimes even impossible to meet the requirements of some use, so it is necessary to find some deficiencies.

　　還一點需要掌握到的，就是像這種濟南手板模型制作，實際上是可以去減少這個產品開模的風險，由于比較許多人明白開模的花費，并不是很便宜，假如在開模的全過程之中，由于設計產品而出現了問題，毫無疑問會對公司導致十分大的成本損害。

　　Also need to master to the point, is the jinan hand-board model like this, in fact is to reduce the risk of the product mould, because many people understand that the cost of the mould opening, and is not very cheap, if in the all process of open mould, the problem due to design the product, will no doubt lead to very big, the cost of damage to the company.

　　所以說，濟南手板模型制作方面的內容要了解到！只有充分了解了，我們才能更好的去使用它，那么還有不懂的問題就來聯系我們www.hzbfpg.cn吧！

　　So, ji 'nan hand model production to understand the content! Only fully understand, we can better use it, then do not understand the problem to contact us!